Stainless Steel Sinks

Harmony workstation

HARMONY Workstation is a multifunctional sink, designed to combine design and professionalism even in domestic kitchens. It is a complete workstation, with a system of sliding accessories that can be combined and used simultaneously. The geometry of HARMONY is specifically designed to allow the dedicated accessories to slide on different levels, inside the specially crafted bowl. HARMONY is at the same time a product that reflects great technical skill and a taste for harmonious proportions. It is characterised by the particular inclination of the steps, which recalls the facets of a diamond; the same geometry is also repeated in the accessories, which interact with the bowl creating a harmonious play of reflections. The HARMONY sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Iris R12

IRIS is the new sink by TASCA with a patented design, designed to combine elegance and functionality in a single refined solution. Characterized by three distinctive elements such as the perimeter edge with a height of 20 mm, the circular shape of the integrated overflow in perfect harmony with the drain cover flush with the bottom of the basin.

IRIS is a patented design sink, made of AISI 304 stainless steel with a regular thickness of 1 mm and a special SatinPlus finish, with a large bowl with a minimal radius of 12 mm and a depth of 200 mm.

In the version with mixer counter Iris adopts the Flick waste with remote pressure control as standard.

Pura Slim R12

PURA SLIM, with an edge of just 8 mm, represents the perfect integration of the elements in the kitchen sink. In PURA SLIM, the essential edge guides the eye immediately towards the bottom of the bowl, where a gentle slope announces the integrated drain, expertly finished. The hidden 'Ghost' overflow, with a flush-fitting plate, completes the harmony of the whole. Easy to install, PURA SLIM has been specifically designed for modern over-top installation, in which the narrow and perfectly flat edge creates a comfortable continuum with the kitchen top. The PURA SLIM sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Pura Slim R12

pvd

Pura Slim R12 is also available in PVD versions in Gun Metal, Copper and Gold.

PVD is a technology that allows the creation of a thin film metal coating through a process of evaporation and subsequent deposition of metal ions in vacuum chambers. PVD coating technology gives the surface greater resistance and durability compared to other chemical or electrochemical treatments. In addition, it guarantees an ecological and hypoallergenic coating, 100% compatible with food.

Pura R12

PURA is the product line with which TASCA was the first to launch a new concept of waste and overflow integration: not just a design choice but an efficient solution in terms of hygiene, ensuring easier cleaning of the most critical areas of the sink. PURA maintains the quality characteristics typical of all TASCA R12 sinks: precision, appreciable in the finished edges; solidity, guaranteed by the uniform thickness of the material; the elegance of the Satinplus finish. With PURA, Tasca has not only achieved the goal of ensuring greater hygiene in the kitchen, but has also managed to extract beauty from the most critical and remote point of each sink. The PURA sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Icon R12

ICON is a series of special sinks with a low divider, which allows for intelligent management of water and space in the kitchen. Thanks to the solid low divider, ICON allows accessories to slide along the entire sink; it also offers adequate maneuvering space for rinsing and washing large objects, as in a large single basin, while ensuring the possibility of using, if necessary, only one of the two basins, with significant water savings.

ICON is a sink made entirely by hand. The ICON sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Canova R12

CANOVA is the sink manufactured by TASCA par excellence. Fratelli TASCA was the first company in Italy to develop the stainless steel bowl with a minimum welded radius; the result of pioneering research in this construction technology, CANOVA has revolutionized the design of traditional kitchen sinks.

The CANOVA model has become a reference on the market, easily distinguishable by the clean lines and minimal style that characterize it. The uniform thickness of the material gives particular solidity to CANOVA, while the total flatness of the edges allows the combination with tops of any material and a perfect installation in each of the three installation options. The CANOVA sink is made of AISI 304 stainless steel with a regular thickness of 1mm, with a Satinplus finish.

Canova R12

pvd

Canova R12 is also available in PVD versions in Gun Metal, Copper and Gold.

PVD is a technology that allows the creation of a thin film metal coating through a process of evaporation and subsequent deposition of metal ions in vacuum chambers. PVD coating technology gives the surface greater resistance and durability compared to other chemical or electrochemical treatments. In addition, it guarantees an ecological and hypoallergenic coating, 100% compatible with food.

Canova R12 DuriX

CANOVA DURIX is the new line of sinks made of AISI 304 stainless steel by Tasca, designed to offer greater resistance to daily wear. The special DuriX finish in fact gives the surface of the steel sink high hardness and greater resistance to scratches, while giving it an ultra-modern matt look.

The DuriX finish is eco-friendly, as it is free of paints and solvents, and it is also sustainable, as it increases the sink's resistance to wear, thus prolonging its life. CANOVA DURIX is completed by the matt black waste, which highlights the finish and creates an attractive urban look.

Canova R12

Maxi

CANOVA R12 in the MAXI version is made of AISI 304 stainless steel with a regular thickness of 1mm, with a Satinplus finish, and a special large drain with a diameter of 7" to accommodate basket wastes.

Asolo R12

ASOLO is the CANOVA version with a rear mixing counter specially crafted and reinforced to accommodate even the heaviest and largest mixers.

ASOLO is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Adria R15

ADRIA is the series of TASCA printed tubs available in the most common standard sizes, which offer practical and functional solutions to effectively respond to daily needs, ensuring ample space and convenience in washing operations.

ADRIA is a sink printed in AISI 304 stainless steel with a thickness of 1 mm and a brushed finish, with a large bowl with a radius of 15 mm and a depth of 200 mm.

Suitable for above-mount and below-mount installation.

Phantom

PHANTOM is the line of sinks designed for use with telescopic mixers. Phantom is equipped with a lowered tap bench, which acts as a housing for the retractable telescopic mixer. The tap area is at the back in PHANTOM BACK and at the side in PHANTOM SIDE, to ensure ease of use in various combinations and situations. PHANTOM sinks also allow the installation of a fixed mixer, using the lowered tap area as a convenient support bench for utensils. Thanks to an internal step, PHANTOM BACK allows the dedicated accessories to slide in support of the tap bench, becoming a compact workstation. The PHANTOM sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Raggio Zero

Sink with a geometric design, with square corners and a diamond bottom. The decisive style combines with the elegant functionality of the integrated overflow. The RAGGIO ZERO sink is made of AISI 304 stainless steel with a regular thickness of 1 mm, with a Satinplus finish.

Lagoon outdoor

LAGOON is the new TASCA line designed for outdoor installation. LAGOON sinks are made of AISI 316 L stainless steel, a special alloy that offers high resistance to corrosion. Also called marine steel, AISI 316L is mainly used in the nautical sector or in environments with high levels of saltiness, such as coastal areas. This makes the LAGOON series perfect for outdoor kitchens. LAGOON includes a selection of single bowls and a selection of sinks with a lowered tap area, which can be combined with the ORION and ZENO mixer taps in AISI 316.

integrated sinks

TASCA R12 PRORIM is the new line of sinks dedicated to professional kitchen top manufacturers. R12 PRORIM is the state of the art for rimless sinks, also known as “blade edge”. Thanks to the special manufacturing technology and the perimeter fixing frame, the sink is installed under the kitchen top in a linear and clean way. This combination not only gives a touch of elegance to the kitchen, but is also hygienic, as the sink becomes one with the kitchen top.

Composite sinks

Vision

Vision is a workstation sink, equipped with tracks for sliding dedicated accessories, which multiply the useful surfaces and volumes, and make working in the kitchen easier and more pleasant. Vision is equipped with a tap bench with pre-cut holes for the installation of a mixer tap and soap dispenser.

Mito

The Mito series offers sinks with a minimal and contemporary design, in the single or double bowl versions. The series is completed by dedicated external sliding accessories. In the version for over-mount installation, Mito offers the possibility of mounting the mixer and other accessories directly on the edge of the sink, thanks to the pre-cut holes. In the version for under-mount installation, Mito is perfectly suited both for installation under the top with disappearing edges, and with partially visible edges.

Modula

Modula is a series that allows you to modulate the sink area to your liking thanks to the various sizes and combinations available. In the version with drainer, Modula becomes a reversible sink. All models are equipped with a tap bench with pre-cut holes for the installation of mixer tap and accessories. The range is completed by a series of functional accessories.